1 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6003_s501 ? 11/19/2013 benefts ? board mountable ? solderable ? high power ? high rate cycling ? long life ? operating temperature range of -40?c to +65?c ? high cycle life > 500,000 cycles ? rohs compliant ? made in usa overview kemet s501 series supercapacitors use a proprietary electrode design to deliver a very high power density. this product features high power performance of up to 600 f capacity in a single ended, board mountable, snap-in termination construction. applications typical applications include automotive subsystems, backup power/ups, handheld/portable devices, hybrid energy storage, hybrid drivetrains, windmill pitch control, emergency lighting, medical devices, power correction, engine starting, and renewable energy. snap-in supercapacitors s501 series, snap-in, 2.7 v, 65oc part number system s501 dc 107 v 2r7 a series size code (d x l) capacitance code (f) capacitance tolerance rated voltage (vdc) termination code supercapacitor, snap-in termination dc = 22 x 45 lf = 35 x 60 li = 35 x 69 lr = 35 x 89 digits 7 & 8 indicate the frst two digits of the capacitance value. digit 9 indicates the number of zeros to be added. v = -5/+10% w = -0/+20% 2r7 = 2.7 a= 2 pin, 10 mm lead spacing, 5.9 mm terminal length u = 4 pin standard snap-in style one world. one kemet
2 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6003_s501 ? 11/19/2013 dimensions C millimeters part number d l s ll nominal tolerance nominal tolerance nominal tolerance nominal tolerance s501dc107w2r7a 22 +1.0/-0 45 +/-2.0 10 +/-0.1 5.9 +/-1.0 s501lf357v2r7a 35 +1.0/-0 59 +/-2.0 10 +/-0.1 5.9 +/-1.0 s501lf357v2r7u 35 +0.6/-0.3 62 +/-1.0 23 +/-0.1 5.9 +/-1.0 s501li407v2r7a 35 +1.0/-0 69 +/-2.0 10 +/-0.1 5.9 +/-1.0 S501LR607V2R7A 35 +1.0/-0 89 +/-2.0 10 +/-0.1 5.9 +/-1.0 snap-in supercapacitors C s501 series, snap-in, 2.7 v, 65oc negative ll d l s terminal pcb patterns 2- ? 2 +/- 0.1
3 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6003_s501 ? 11/19/2013 performance characteristics item performance characteristics rated voltage 2.7 vdc surge voltage 2.85 vdc capacitance range 100 C 600 f capacitance tolerance -5/+10%; [100 f -0/+20%] temperature range -40c to +65c storage temperature range -40c to +70c life, dc 10 years, rated voltage, 25c c < 20% decrease, esr < 100% increase life, endurance 1,000 hours, rated voltage, 65c c < 20% decrease, esr < 100% increase life, shelf 1,000 hours, no voltage, 70c c < 20% decrease, esr < 100% increase life, cycle > 500,000 cycles, rated to half rated voltage, 25c c < 20% decrease, esr < 100% increase standards compliance rohs, ul810a, bs en 60068-2-6,27,29, iec 60068-2-14, sae j2464, j2390, j1455, astm b117, ip65, milCstdC810 b, test methods 516.3-5, 514.3-1, 509.2-1 approvals series test type test standard date completed (or estimated) s501 vibration iec 60068-2-6 may 2013 sae j2380 iso 16750-3 mechanical shock iec 60068-2-27 underwriters laboratory ul- 810a 1 by partnumber sae safety and abuse sae j24645 2 pending 12/31/2013 1 ul-810a includes the following tests: short circuit, abnormal charge, heating, crush, impact, shock, vibration 2 sae j2464 includes the following tests: nail penetration, crush, thermal stability, thermal shock, short ciruit, overcharge, forced vent snap-in supercapacitors C s501 series, snap-in, 2.7 v, 65oc
4 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6003_s501 ? 11/19/2013 environmental compliance all kemet supercapacitors are rohs compliant. table 1 C ratings & part number reference part number s501dc107w2r7a s501lf357v2r7a s501lf357v2r7u s501li407v2r7a S501LR607V2R7A electrical capacitance (f) 100 350 350 400 600 capacitance tolerance -0/+20% -5/+10% -5/+10% -5/+10% -5/+10% rated voltage (v) 2.7 2.7 2.7 2.7 2.7 surge voltage (v) 2.85 2.85 2.85 2.85 2.85 esr, dc (m) [10ms] 4.2 3.2 2.7 3.2 3.2 esr, ac 1 khz (m) 3.6 3.1 2.4 3 3 inductance 30 (nh) 120 150 150 150 150 72 hour leakage (ma) 0.27 1 1 1.2 1.5 cycling current, peak [1s] (a) 95 223 243 237 277 continuous current (a)* 13 24 24 24 28 current, short circuit (a) 643 844 750 844 844 thermal resistance, thermal (c/w) 22 11 10 10 8 energy/power maximum stored energy (wh) 0.1 0.35 0.35 0.41 0.61 energy density (wh/kg) 5.1 5.4 5.4 5.3 6.3 energy density (wh/l) 5.9 6.2 5.9 6.2 7.1 power density (kw/kg) 21.7 8.6 10.2 7.4 5.9 power density (kw/l) 25.5 10 11.2 8.8 6.6 maximum power (kw/kg) 10.4 4.1 4.9 3.6 2.8 physical case size dc lf lf li lr d x l (mm) 22 x 45 35 x 59 35 x 62 35 x 69 35 x 89 weight (kg) 0.02 0.066 0.066 0.077 0.096 volume (l) 0.017 0.057 0.06 0.065 0.086 volume of acn (l) 0.008 0.027 0.027 0.031 0.042 *rated current = continuous current with 20c temperature rise. snap-in supercapacitors C s501 series, snap-in, 2.7 v, 65oc
5 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6003_s501 ? 11/19/2013 mounting do not scratch or fle the lead terminals. the terminals are plated with metal and the removal of the plated material will cause poor solderability. do not overheat when soldering. solder temperature lower than 260c and time shorter than 5 seconds are recommended. for hand soldering, tip temperature should be no higher than 350c (662f) for a maximum contact time of 3 seconds. only the snap-in terminals should come into contact with liquid solder or iron. excessive heat on the snap-in terminal boards can cause damage to seals, shrink sleeve, and electrodes resulting in shortened life or premature part failure. important! do not deform, pull or twist the terminals. the terminals are attached to the electrodes in the interior of the aluminum casing and are tightly embedded in the rubber-plug sealing the casing. repeated or forceful bending, pulling, or twisting of the terminal may create a path opening along the terminal in the rubber for electrolyte to leak out. the electrolyte leakage may not only shorten the useful life of the product, but it may also cause corrosion and/or short-circuit of neighboring circuitry. if deforming the terminal is unavoidable or essential to the assembly process, please use needle-nose pliers to bend the lead wire while holding the base of the same terminal using another needle-nose pliers so that the force applied to the wire is not transmitted to the rubber seal. kemet recommends utilizing a pc board when connecting the cells to the circuit or electronic devices. in addition, avoid placing exothermic components near the supercapacitor or on the opposite side of the pc board. please maintain a minimum distance of 3 mm between the bottom surface (opposite terminals) of the cell and other components/ housings in order to allow for unimpeded venting of gas through the safety vent. packaging quantities part number capacitance (f) rated voltage package type package quantity box weight box length box width box height s501dc107w2r7a 100 2.7 box with cardboard separators 128 7 lbs (3.2 kgs) 15.0" (381 mm) 8.0" (203 mm) 3.5" (89 mm) s501lf357v2r7a 350 2.7 50 8 lbs (3.7 kgs) 15.0" (381 mm) 8.0" (203 mm) 3.5" (89 mm) s501lf357v2r7u 350 2.7 50 9 lbs (4.1 kgs) 15.0" (381 mm) 8.0" (203 mm) 3.5" (89 mm) s501li407v2r7a 400 2.7 50 9 lbs (4.1 kgs) 15.0" (381 mm) 8.0" (203 mm) 3.5" (89 mm) S501LR607V2R7A 600 2.7 65 16 lbs (7.3 kgs) 17.0" (432 mm) 8.5" (216 mm) 4.0" (102 mm) standard marking ? kemet logo ? rated capacitance ? rated voltage ? product number ? negative terminal marking ? energy in wh snap-in supercapacitors C s501 series, snap-in, 2.7 v, 65oc
6 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6003_s501 ? 11/19/2013 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america southeast lake mary, fl tel: 407-855-8886 northeast wilmington, ma tel: 978-658-1663 central novi, mi tel: 248-994-1030 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe paris, france tel: 33-1-4646-1006 sasso marconi, italy tel: 39-051-939111 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe bishop?s stortford, united kingdom tel: 44-1279-460122 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5829-1711 shanghai, china tel: 86-21-6447-0707 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6586-1900 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. snap-in supercapacitors C s501 series, snap-in, 2.7 v, 65oc
7 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com s6003_s501 ? 11/19/2013 other kemet resources tools resource location con? gure a part: capedge http://capacitoredge.kemet.com spice & fit software http://www.kemet.com/spice search our faqs: knowledgeedge http://www.kemet.com/keask electrolytic lifecalculator http://www.kemet.com:8080/elc product information resource location products http://www.kemet.com/products technical resources (including soldering techniques) http://www.kemet.com/technicalpapers rohs statement http://www.kemet.com/rohs quality documents http://www.kemet.com/qualitydocuments product request resource location sample request http://www.kemet.com/sample engineering kit request http://www.kemet.com/kits contact resource location website www.kemet.com contact us http://www.kemet.com/contact investor relations http://www.kemet.com/ir call us 1-877-mykemet twitter http://twitter.com/kemetcapacitors disclaimer all product speci? cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet speci? cally disclaims C any warranty concerning suitability for a speci? c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemet?s products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all product?related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. snap-in supercapacitors C s501 series, snap-in, 2.7 v, 65oc
|
